Unit History File per VIN: What to Include. Unit history file per VIN: what to keep from DAF and PDI photos to claims, work orders, parts and incidents so RV warranty claims hold up later.
What goes in a unit history file
A unit history file should hold every record tied to one VIN from the day the unit arrives until its warranty period ends: DAF and PDI photos, the warranty registration, every claim with its claim number and outcome, work orders, parts orders and returns, recall and campaign work, component serial numbers, customer incidents and aftermarket installs. Kept in one place and in date order, that file proves what condition the unit was in, what has already been claimed and what was actually done, which is exactly what a manufacturer looks at when it reviews a claim months later. The warranty registration and its confirmation deserve special care, because the retail sale or in-service date it records is what manufacturers use to decide whether the unit is still in coverage.
Most dealerships already create these records. The problem is where they live: photos on a technician's phone, work orders in the DMS, claim numbers in a manufacturer portal, parts returns in a shipping log, a customer's damage story in a salesperson's inbox. Each piece is fine on its own, but when a warranty administrator needs to show the full story of one unit, they end up rebuilding it from scratch, and anything they cannot find is treated as if it never happened.
The fix is not a new system. It is a rule: the VIN is the key, and every record for that unit is either stored in its file or referenced there with a location and a document number. Whether the file is a folder in your DMS, a shared drive or a claims portal matters less than the discipline of filing everything under the VIN the same day it is created.
Start the file at arrival: DAF and PDI as the baseline
The delivery acceptance (DAF) inspection is the first entry, and the most important one. Photograph the unit as it comes off the carrier: every side, the roof, the undercarriage where reachable, the VIN plate and any damage close up with something in frame for scale. Note the date, the carrier and who did the inspection. These photos are what separate transit damage and factory defects from damage that happened on your lot, and manufacturers often accept transit and delivery claims only within a short window after arrival, so confirm the current window in each manufacturer's warranty manual or portal.
The pre-delivery inspection (PDI) is the second baseline. Photograph and record every system you test, such as slide-outs, leveling, plumbing, electrical, appliances and roof seals, along with every defect you find and the work order that fixed it. Photograph the serial tags of major components such as the refrigerator, air conditioner, water heater, furnace and generator too, since supplier and manufacturer claims often ask for those numbers. At the sale, add the warranty registration: the retail sale or in-service date as submitted, the date the unit was registered and the manufacturer's registration confirmation. A clean PDI with photos also protects you later: when a customer reports a leak a few months after delivery, PDI photos of intact sealant show the condition of that area when the unit left your lot.
Name photos and documents consistently so they sort by VIN and date without anyone opening them. A simple pattern of VIN, stage and date is enough, for example the last digits of the VIN followed by DAF or PDI and the inspection date. The goal is that anyone on your team, or a manufacturer reviewer, can tell in seconds which inspection a photo belongs to.
Claims, work orders and parts: keep the trail connected
Every claim filed on the unit belongs in the file with its claim number, the date filed, the Complaint/Cause/Correction as submitted, the FRC lines and labor claimed, and the outcome: approved, adjusted, denied or appealed. Store the manufacturer's responses alongside it, including any information requests and what you sent back. A claim number on its own is not enough; you need to be able to see what was claimed under it. Recall and campaign or service bulletin work done on the VIN belongs here too, with the campaign or bulletin number, the work order and the completion date, because a reviewer will check whether an open campaign already covers the component you are claiming.
Link each claim to the work order that performed the repair, and each work order to the parts that went into it. For parts, record the part number, the order or RMA number, whether the failed part had to be held or returned, the return tracking number and the ship date. Denials and chargebacks often trace back to a part that was supposed to be returned and was not, or was returned without paperwork tying it to the claim. Parts-return rules differ by manufacturer, so check each one's requirements.
Here is what a well-filed line looks like. Complaint: customer reports a water stain on the bedroom slide ceiling, front left corner. Cause: sealant at the slide-out top corner seam separated, allowing water entry. Correction: removed failed sealant, cleaned and resealed the corner seam, water-tested, no further leak. Filed with it: the claim number, the work order number, before-and-after photos, the labor operation used and a note that no parts were required. When the same unit comes back the following season with a stain in the same corner, the file shows at a glance whether this is a repeat failure of that repair or a new issue.
Customer incidents and aftermarket installs
Record anything that happens to the unit that is not a factory defect. If a customer brings it in after backing into a post, after a storm or after a skipped winterization, note the date, what the customer told you, photos of the damage, and whether it was handled through insurance or customer pay. These entries feel unrelated to warranty, but they are the reason a later claim on the same area either holds up or gets screened out.
Aftermarket installs need the same treatment. A solar kit, an added TV mount, a hitch, a satellite dish or a replaced appliance changes what the manufacturer is responsible for. Record what was installed, by whom, when, the work order and photos of where it touches the original structure, roof or wiring. When a leak appears around a roof penetration, one of the first questions a reviewer will ask is whether that penetration came from the factory.
This is also where honesty pays off. A file that shows the customer damage and the aftermarket work makes your legitimate claims more credible, because the reviewer can see you separated them yourself. Screening out what is not claimable before filing keeps your claim history clean and your relationship with the manufacturer's warranty team in good standing.
How the file answers info requests, prevents duplicates and supports an audit
Information requests are one of the most common reasons claims stall. A manufacturer asks for a photo of the serial tag, proof the unit was inspected at delivery, or the return tracking number for a part. With a history file, the answer is a quick lookup instead of a search through phones and inboxes, and the claim keeps moving instead of sitting until it times out.
Duplicate lines are the quieter problem. When two technicians write up the same defect on different visits, or a PDI repair is filed and later refiled as warranty, the manufacturer is likely to reject the second line and may question the first; check each manufacturer's duplicate-claim policy in its warranty manual or portal, since policies differ. Checking the file before filing a new claim, by asking whether there is already an open or paid claim on this component, catches duplicates before they reach the portal. A worked example: a slide-out motor is reported failing mid-season. The file shows a claim on the same motor at PDI, approved, with the replacement part number. The new claim is filed as a repeat failure of a replaced part, referencing the original claim number, rather than as a new defect that looks like a duplicate.
Audits work the same way. When a manufacturer reviews your warranty claims, it selects claims and asks for the supporting documentation: photos, the signed work order, the parts return. A dealership with VIN history files hands over complete packages; one without them rebuilds each from scratch and risks chargebacks on anything it cannot produce. However the review is run, the history file is what makes it manageable.
A checklist you can start using tomorrow
Start with units in stock and units still under warranty, not your entire history. Create a file per VIN, back-fill what you can find, and from today make filing under the VIN part of closing every inspection, work order and claim. Assign one person, usually the warranty administrator, to confirm each file is complete when a claim is closed.
If you're in Canada, customer details in the file fall under federal or provincial privacy law; if you're in the US, state privacy rules may apply. In both countries, keep personal information to what the claim needs, and confirm how long records must be kept with your accountant and each manufacturer's dealer agreement, since retention rules differ.
Dealer Suite 360 takes the claims work around this file off your desk. Your team takes the DAF, PDI and warranty-period photos in the DS360 app and uploads the work orders; our claims specialists screen out what isn't claimable, write the Complaint/Cause/Correction with the right FRC lines, file on the manufacturer portal, answer information requests, order and track parts, appeal denials, request payment and close the claim. Your dealership handles the repairs. We handle everything around them, for a flat monthly subscription with no per-claim fees.
- DAF photos, carrier, date and damage close-ups
- PDI photos, test results and work orders for fixes
- Warranty registration: retail sale or in-service date and confirmation
- Every claim: number, Complaint/Cause/Correction, FRC lines, linked work order, info requests, outcome
- Recall, campaign and service bulletin work on the VIN
- Component serial numbers: appliances, A/C, water heater, furnace
- Parts: part numbers, order or RMA numbers, return tracking
- Customer incidents and aftermarket installs, with photos, dates and who paid
Learn more
Questions dealers ask
What should a unit history file include so our warranty claims hold up later?
Everything tied to the VIN from arrival to the end of the warranty period: DAF and PDI photos, the warranty registration with its retail sale or in-service date and confirmation, each claim with its number, Complaint/Cause/Correction and outcome, the linked work orders, parts orders and returns, recall and campaign work, component serial numbers, customer incidents and aftermarket installs. The test is whether someone who has never seen the unit could reconstruct its story from the file alone.
Do we need special software to keep a history file per VIN?
No. A folder per VIN in your DMS or on a shared drive works if everyone files records the same day and names them consistently. What matters is that the VIN is the key and that nothing lives only on a phone or in an inbox.
How long should we keep a unit's history file?
At least through the end of the manufacturer's warranty and any extended-warranty coverage, and long enough to cover a manufacturer audit of past claims. Retention requirements differ by manufacturer, dealer agreement and jurisdiction, so confirm the rule in your dealer agreement and with your accountant.
Should customer damage really go in the warranty file?
Yes. Recording customer damage and insurance repairs shows the manufacturer that you separate non-warranty work yourself, and it explains later repairs in the same area. Leaving it out makes later claims harder to defend, not easier.
What if the unit was sold before we started keeping history files?
Back-fill what you can: pull the work orders from your DMS, the claim history from each manufacturer portal and any photos still on file. Note what is missing so nobody assumes it exists, and keep the file complete from today forward.
Dealer Suite 360 is the RV warranty claims management specialists: we prepare, file, follow up, appeal, request payment and close your claims. Book your free claims audit and see what your dealership is leaving on the table before you pay anything.


