In this article
- 01The short answer: a stalled claim is a unit you pay for but cannot sell
- 02Where the days actually go between arrival and the front line
- 03The math: how to calculate it with your own numbers
- 04Habit one: file arrival findings the day you find them
- 05Habits two and three: pre-authorize early and chase approvals every week
- 06Measure the hold, then take the paperwork off your desk
- Learn more
- Questions dealers ask
01 The short answer: a stalled claim is a unit you pay for but cannot sell
Slow warranty claims keep units with arrival defects off your front line, and every day they sit there your floorplan lender keeps charging interest while the unit has no realistic chance of selling. That pushes down unit turn, raises the carrying cost per unit, and can push a unit closer to curtailment dates before it ever reaches a customer.
It is on your books and on your floorplan statement, but it is not on your lot where shoppers can see it.
The mechanism is simple. A new unit arrives with a delaminated sidewall, a leaking slide seal or a dead converter. Your team documents it at delivery acceptance (DAF) or during PDI, and the repair cannot start, or cannot be paid, until the manufacturer authorizes it. While that request waits for a reply, for parts, or for someone at your store to follow up, the unit is parked in the back lot or in a service bay. It is on your books and on your floorplan statement, but it is not on your lot where shoppers can see it.
Most dealers see warranty as a service department revenue question: did we get paid for the labor and parts. The inventory side is easier to miss because the cost does not show up on the claim. It shows up on the floorplan statement and in aged inventory reports, spread across many units, so nobody connects it to a claim that sat unanswered for weeks.
02 Where the days actually go between arrival and the front line
When you trace a held unit back, the delay rarely sits in the repair itself. Technicians can often fix a slide seal or swap a converter in part of a shift. The days pile up in the gaps around the repair: the finding is noted at DAF but the claim is not written until the unit comes up for PDI; the claim goes in with vague wording and comes back with a request for more photos; the authorization arrives but nobody orders the part until the next parts run; the part arrives and the unit waits for a bay.
Where a held unit’s days go
A typical sequence for a unit held on an arrival claim. Only one segment is repair work.
- 1
Finding noted at DAF, claim not written
The claim waits until the unit comes up for PDI.
- 2
Vague claim, info request
The manufacturer asks for more photos or detail, and the clock starts again.
- 3
Waiting on authorization
The request sits in the manufacturer’s review queue.
- 4
Approval in, part not ordered
The order waits for the next parts run.
- 5
Part in transit
Shipping time you cannot control, but can start sooner.
- 6
Unit waits for a bay
The part is here; the shop is full.
- 7
The repair itself
Often part of one shift.
-
Line-ready: the unit reaches the front line
Each gap is small on its own. Together they turn a repair measured in hours into a hold measured in weeks. The common thread is that most of these gaps are administrative, not mechanical. They come from claims that are filed late, filed incomplete, or filed and then left alone in the manufacturer portal without anyone checking their status.
Manufacturers differ in how they handle arrival damage, what needs prior authorization, which repair amounts trigger pre-approval and how long you have to report transit or arrival findings. Those rules also change. Before you build a process around any of them, confirm the current requirements in each manufacturer's warranty manual or dealer portal rather than assuming one brand's rule applies to all.
03 The math: how to calculate it with your own numbers
You do not need an industry benchmark to size this problem. Your floorplan statement and your claim log give you everything. Use these placeholders: B is the floorplan balance on the held unit, R is your annual floorplan interest rate as a decimal, and D is the number of days the unit was held off the front line because of an open claim. The interest cost of that hold is roughly B multiplied by R, divided by 365, multiplied by D. If your lender calculates interest differently, use the daily figure from your own statement instead.
The floorplan math
- B
- Floorplan balance on the held unit
- R
- Annual floorplan interest rate, as a decimal
- D
- Days the unit was held off the front line for an open claim
- N
- Units held for a claim in the month
- A
- Average days those units were held
Now scale it. Let N be the number of units held for a claim in a given month and A be the average days held. Your monthly carrying cost from claim holds is roughly N multiplied by A multiplied by the average daily interest per unit. Run it for last quarter and compare it with what the same units earned in warranty labor. If the interest carried during the wait is a meaningful share of what the repair paid, treat speed as part of the claim, not an afterthought.
Run it with your own numbers
Take the figures from your floorplan statement and claim log. There are no defaults: the result is yours, not an industry average.
Interest per day
Cost of this hold
All held units, this month
Runs in your browser; nothing you type is sent or saved. The monthly figure assumes every held unit carries the balance and days above, so treat it as a rough stand-in for your averages. An estimate, not a quote or a promise of savings.
Interest is only the visible part. A unit held for D days is also D days older when it finally reaches the line, which affects aged inventory reports, any curtailment schedule in your floorplan agreement, and the margin you can hold when the unit is no longer fresh. It also occupies a space and, if it sits in a bay, takes capacity away from paying customer work. Check your floorplan agreement for curtailment timing and any terms that change as a unit ages, because those vary by lender. Held days also feed straight into turn. If you measure turn as annual cost of sales divided by average inventory, every held day raises average inventory without adding a sale, so turn falls; if you track days in stock or days supply, each held day adds directly to that unit's age and to your days-supply figure. Set D beside your days-in-stock report and you can see how much of each unit's age came from waiting on a claim.
04 Habit one: file arrival findings the day you find them
The fastest claim is the one that starts the moment the unit comes off the truck. Inspect at delivery, photograph every finding while the carrier context is still clear, and get the DAF claim written and submitted the same day or as close to it as you can. Waiting until PDI to write up arrival findings adds days before the manufacturer even sees the request, and it blurs the line between transit damage, factory defects and anything that happened on your lot.
Write the claim so it can be approved on the first read. A vague line such as "Complaint: slide leaks. Correction: repaired" invites a request for information.
The same finding, written two ways
Vague
Complaint: slide leaks. Correction: repaired
Invites a request for information. The unit keeps waiting.
Complete
Complaint: water intrusion at curbside slide, lower front corner, found at delivery inspection. Cause: slide seal not seated in the track at the factory. Correction: removed and reseated slide seal, resealed corner, water-tested, no further intrusion.
Written to be approved on the first read, with photos of the condition, the location and the VIN attached.
Attach the photos that show the condition, the location and the VIN, and use the labor operation or FRC line the manufacturer expects for that repair.
Build a short arrival routine your team runs on every unit, regardless of brand, so nothing depends on who is working that day:
The arrival routine
0/6 doneTick through it at your next delivery. Nothing is saved.
05 Habits two and three: pre-authorize early and chase approvals every week
If a repair needs prior authorization, request it as soon as the finding is documented, not when the unit finally reaches a technician. Pre-authorization is a common place for units to lose time, because the request often waits for the unit to come up in the schedule, then waits again in the manufacturer's queue. Submitting the authorization request at arrival lets the two clocks run at the same time: the manufacturer reviews while the unit waits its turn for PDI. When approval comes back, order the part immediately and record the order date so you can see where parts delays start.
The third habit is the least glamorous and often the most effective: a fixed weekly review of every open claim attached to an unsold unit. Sort the list by days open, and for each claim answer three questions. What is the current portal status? Is the manufacturer waiting on us for photos, an estimate or a clarification? If it is waiting on them, has someone followed up this week? Info requests that sit unanswered in a portal are one of the most common reasons a unit stays parked, and they are entirely within the dealer's control.
The weekly open-claim review
Every open claim attached to an unsold unit, sorted by days open.
| Question | If the answer is… | Action this week |
|---|---|---|
| What is the current portal status? | Unknown, or not checked this week | Check the portal and log the status next to the stock number |
| Is the manufacturer waiting on us? | Yes: photos, an estimate or a clarification | Answer the info request before the next review |
| If it is waiting on them, has someone followed up? | No follow-up this week | Follow up, and escalate claims that have not moved |
Put a name on each step. Someone owns the arrival claim, someone owns parts orders on approved claims, and someone runs the weekly review and escalates claims that have not moved. Share the held-unit list with your sales manager too, so the front line knows which units are coming and which claims are holding up inventory they want to sell. The same delay reaches past arrival claims. A retail warranty repair waiting on approval holds a bay or forces the customer into a second visit, and every bay-hour spent on a stalled claim is an hour unavailable for customer-pay work. Keep units already sold but awaiting a claim repair on the held-unit list too: they may no longer carry floorplan interest once the deal funds, but they still tie up bay capacity, scheduling and the customer's goodwill.
06 Measure the hold, then take the paperwork off your desk
Add one column to your claim log: days held off the front line for each unit with an arrival claim, from the delivery date to the day the unit was line-ready. Review it monthly beside your floorplan statement using the formula above. Within a few months you will see which manufacturers, which defect types and which steps in your own process account for most of the held days, and you will have a dealer-specific number to bring to your general manager instead of a guess.
The habits in this guide are straightforward. What makes them hard is that they compete with every other job in a busy service department.
The habits in this guide are straightforward. What makes them hard is that they compete with every other job in a busy service department, and they slip first when the shop gets full. That is the work Dealer Suite 360 takes on. Your team inspects units and takes the photos in the DS360 app at DAF and PDI, and we analyze them, screen out what is not claimable, write the Complaint, Cause and Correction to each manufacturer's standard, file on the portal, follow up, answer info requests, appeal denials and order and track the parts until the claim is paid and closed. Your dealership handles the repairs. We handle everything around them, for a flat monthly subscription with no per-claim fees, so the claims that hold your inventory move every week whether your shop is quiet or slammed. For a closer look at the in-house trade-offs, see our guide comparing DS360 with in-house warranty administration.
Who does what with Dealer Suite 360
| Task | Your dealership | Dealer Suite 360 |
|---|---|---|
| Inspect units and take photos in the DS360 app at DAF and PDI | Yes | No |
| Analyze the photos and screen out what is not claimable | No | Yes |
| Write Complaint, Cause and Correction to each manufacturer’s standard | No | Yes |
| File on the manufacturer portal | No | Yes |
| Follow up and answer info requests | No | Yes |
| Appeal denials | No | Yes |
| Order and track parts until the claim is paid and closed | No | Yes |
| Perform the repairs | Yes | No |
Learn more
Questions dealers ask
How do slow warranty claims affect our unit turn and floorplan cost?
A unit with an open arrival claim usually cannot go on the front line until the defect is repaired, and floorplan interest accrues every day it waits. Slow claims therefore lower your turn and raise the carrying cost per unit. You can size it with your own figures: floorplan balance times annual rate, divided by 365, times the days held.
Should we sell a unit with an open arrival claim before the repair is done?
Some dealers do, but it carries risk: the customer may take delivery of a unit with a known defect, scheduling the repair becomes harder, and some manufacturers treat claims differently once a unit is retailed. Check the manufacturer's warranty manual and your own disclosure obligations before deciding, and in most cases aim to clear the claim before the unit is sold.
What is the single biggest cause of units waiting on claims?
It varies by dealership, which is why tracking days held matters. In practice, the gaps are usually administrative: arrival findings written up late, incomplete claims that trigger info requests, and approved claims or open questions that nobody follows up on. A weekly review of every open claim on an unsold unit tends to expose the pattern quickly.
Do all manufacturers require pre-authorization for arrival repairs?
No. Manufacturers set their own rules on what needs prior approval, at what repair amount, and how quickly arrival or transit findings must be reported, and those rules change. Confirm the current requirements in each manufacturer's warranty manual or dealer portal, and build your arrival routine so the authorization request goes in as soon as the finding is documented.
How can we tell how much slow claims are costing us right now?
Pull last quarter's units with arrival claims, record the days each was held before it was line-ready, and apply your floorplan rate to each balance using the formula in this article. The free claims audit from Dealer Suite 360 adds the other side of the picture by showing what your dealership is leaving on the table in claims before you pay anything.
Units waiting on paperwork?
We are the RV warranty claims management specialists: we prepare, file, follow up, appeal and get paid on your claims, so units stop waiting on paperwork. Book your free claims audit and see what your dealership is leaving on the table.


